Over time, garage door panels are become dented or damaged though misuse or overall wear and tear. Whatever the circumstances, you may opt to replace the old with a more aesthetically pleasing and suitable option. In this article we will outline the steps necessary to replace these panels DIY style.
Required Materials & Tools
Wheels 16
* Screwdriver
* Ratchet & Socket
* Replacement Panels
Cheap Mr. Gasket 2371 5/16" Disc Brake Bolt Pattern Wheel Spacer Kit Discount Review Shop
Available at Amazon
Cheap "Mr. Gasket 2371 5/16" Disc Brake Bolt Pattern Wheel Spacer Kit" Discount Review Shop
"Mr. Gasket 2371 5/16" Disc Brake Bolt Pattern Wheel Spacer Kit" Feature
- Ensures a tough, durable finish that is resistant to chipping, scratching and oxidation
- Provides clearance for custom wheel applications
- Eases installation of custom width wheels
- Constructed from die-cast aluminum
- Enables the wheel to be bolted to the spacer to ensure maximum safety
"Mr. Gasket 2371 5/16" Disc Brake Bolt Pattern Wheel Spacer Kit" Overview
Mr. Gasket 5/16" disc brake bolt pattern wheel spacer kits are designed from superior quality die-cast aluminum. Provides necessary clearance for custom wheel applications. Fits 5 lug and 4-1/2 to 5 bolt patterns. [if ]Customer Reviews
Step 1: Ordering
Once the manufacturer has been identified, you should be able to place an order for the replacement panels. Where older models are concerned, you may be forced to contact the maker directly. Otherwise, a local company should do just fine.
Step 2: Removal
If you have an automatic opener, you'll need to unplug it prior to engaging in any further tasks. Once power is shut off, open the door manually and remove each spring. In this way, you will ensure your own safety and minimize the risk of damage to the unit itself.
Panels are typically jointed together and have little wheels, or rollers on the side which run along the tracks, allowing free motion of the door. Unless the panel in question is situated at the top, you will have to remove each one individually in order to reach your desired piece.
Begin by separating the top one from the one directly below it. You may need to employ the use of a ratchet and socket set. Once the piece is loosened, lift up until it comes off the track completely. Repeat these steps as needed until the correct one has been removed.
Step 3: Replacement
In order to replace the new piece, slide the rollers into the tracks, lowering the panel down until which point you're able to see it touching the panel underneath. Attach the new panel to the one in place below it.
Next, reattach each successive piece in the order that they were removed. Be sure to inspect your work to ensure that each fastening is tight and secure. Once you've concluded that everything is in its designated place, plug the opener back in. Test the door by operating the opener to see that each piece moves smoothly along the tracks.
Step 4: Finishing
Chances are, your new panel will not be the same color that the others. To correct this, it is recommended the entire door be repainted. Once the work is done as per the steps, sit back and enjoy the outcome!
Garage Door Panel Replacement
No comments:
Post a Comment